Basic Building Parameter

01.

Building Length

Building Length is the sum of all bay lengths. For the flush end wall, this is measured as the distance between outside flanges of two end wall columns on opposite end walls. For by-pass end walls, it is measured as the distance between outer faces of wall girt along two end walls.

02.

Building Width

Width of a building is defined as the distance between the outer sides of two eave struts along two sides of the building.

03.

Building Height

Height of a building usually termed as eave heights’ is the height of top outer system Point of the eave strut from finished floor.

04.

Roof Slope

This defined as the angle between roofline with the horizontal Any practical roof slope is possible Most commonly used roof slope is 1:10

05.

Interior Bay Length

This is the distance between the center lines of two adjacent interior rigid frames Most common interior bay lengths are 6m ,7.5m, 8m & 9m.

06.

End Bay Length

This is the distance from the centerline of first interior rigid frame to the outer flange of the adjacent end column (flush system) or outside of end wall girt (by/pass)

We Can Provide Construction Services in Turn Key Basis.

We Provide Following Expert Services To Dur Customers

We give much importance to continuous improvement in Quality products and services. We ensure the quality of our steel members, before delivering those.

Prefabricated steel buildings have the advantage of sustaining in the face of earthquakes, cyclones etc. We
are committed to save production time to ensure the quick return of customer’s investment.

Structure Group is concerned for social duties and aiming to take part for building a clean and Pollution free Bangladesh.

We also train young professionals to give the world skilled manpower. We Invite all professionals to visit our office and factory to share views, So that by knowledge sharing our Country can go ahead.

Backup